Mechanical Engineer

Found in: beBee S KW - 1 month ago

Ali Al Salem, Kuwait Amentum Full time

Mechanical Engineer performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

 

Principal Accountabilities:

  • Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput
  • Performs design work for new construction, renovations and improvement projects for real property facilities
  • Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
  • Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers
  • Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy
  • Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors
  • Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts
  • Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering
  • Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
  • Living and working conditions at the assignment location could be remote and uncomfortable
  • Long hours, exposure to weather and hazardous conditions
  • Personnel should be aware of moving on short notice and under adverse conditions 

Minimum Requirements:

  • Mechanical Engineering degree required, licensed mechanical engineer preferred.
  • Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
  • Must be proficient in AutoCAD 2012 or later.
  • Experience in the use of documents relating to the development of projects, contracting, and construction is necessary
  •  Ability to travel domestically and internationally
  • Must be able to obtain and maintain an Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.

Preferred Qualifications:

  • Excellent communications, effective leadership and interpersonal skills
  • Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design
  • Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management
  • Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution
  • Computer literate; can use Microsoft Office and Project, etc

       

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters

EEO including Disability/Protected Veterans

  • Mechanical Engineer 3

    Found in: beBee S KW - 3 weeks ago

    Ali Al Salem, Kuwait Amentum Full time

    Mechanical Engineer performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems. Principal Accountabilities: Designing and implementing cost-effective equipment...

  • Mechanical Engineer

    2 weeks ago

    Al Farwaniyah, Kuwait DOROOB HR CONSULTING Full time

    An Architecture & Consulting Company in Kuwait has governmental projects looking to hire the following :Civil / Architecture Engineer.Candidate should have a Bachelors Degree in Mechanical Engineering.Experience not less than 1022 years in Structural and Mechanical design and implementation of water plant projects (pumping stations overhead water towers...

  • AutoCAD Technician

    Found in: beBee S KW - 3 weeks ago

    Ali Al Salem, Kuwait Amentum Full time

    The AutoCAD Technician services shall include editing and producing documents, providing courier services between contractor and Government counterparts, and providing timely delivery services. Principal Accountabilities(Typical duties include the following, although specific duties vary by assignment or contract.) Prepare required reports for management...

  • Site Manager

    Found in: beBee S KW - 3 weeks ago

    Ali Al Salem, Kuwait Amentum Full time

    Purpose and Scope: The Site Manager is responsible for meeting Contractor’s work requirements, including scheduling of personnel, work supervision, and quality control for all tasks associated with this Task Order.  The Site Manager shall have full authority to act for the Contractor on all task order matters relating to daily operation of this...

  • Geospatial Information Specialist

    Found in: beBee S KW - 4 weeks ago

    Ali Al Salem, Kuwait Amentum Full time

    Purpose and Scope: The Geospatial Information Specialist (GIS) shall provide all personnel, equipment, administration, and services necessary to provide technical support to plan, acquire, sustain, manage, operate, and divest Geographic Information Systems. The position is based in Ali Al Salem, Kuwait.Essential Responsibilities:The employee shall be able to...

  • Lead Design Engineer Mechanical

    Found in: beBee S KW - 4 weeks ago

    Airport, Al Farwaniyah, 86, Kuwait Wood Plc Full time

    Overview / Responsibilities Wood is recruiting a Lead Design Engineer - Mechanical (Rotating and Static) to monitor the assigned scope to ensure Wood and Contractors perform all work to agreed standards for safety, health environment and demonstrate a commitment to attaining high levels of HSE (Health, Safety & Environment) performance.Participate in...

  • Engineer Machine Shop

    Found in: beBee S KW - 4 weeks ago

    Al Fuhayhil, Kuwait Gulf Spic Full time

    BACHELORS DEGREE IN MECHANICAL ENGINEERING FROM A RECOGNIZED UNIVERSITY Fulltime 8 + YEARS 1 NOS SHOULD HAVE EXPERIENCE IN ALL TYPES OF MECHANICAL REPAIR WORKS IN OIL REFINERY OR PETROCHEMICAL COMPLEX USING INDUSTRY STANDARDS, CODES AND PRACTICES. Apply now to : jobs@gulfspic.com indicating the Job Code and Title along with below details: Detailed...

  • Aircraft Mechanic 2

    Found in: beBee S KW - 3 weeks ago

    As Syer - Um Al Medfaa, Al Jahra, 03, Kuwait PAE Full time

    The Aircraft Mechanic II (Sheetmetal) maintains, modifies, and integrates the aircraft structure and its parts. Maintain, modify, and install the various components of aircraft sheet metal. Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external. Lay out plans, fabrication, and installation models for...

  • Engineer Rotating Equipment

    Found in: beBee S KW - 4 weeks ago

    Al Fuhayhil, Kuwait Gulf Spic Full time

    BACHELORS DEGREE IN MECHANICAL ENGINEERING FROM A RECOGNIZED UNIVERSITY Fulltime 8 + YEARS 1 NOS SHOULD HAVE INDUSTRIAL PAINTING EXPERIENCE. MUST KNOW HOW TO SELECT APPROPRIATE PAINT OR MIX PAINTS. SHOULD BE ABLE TO OPERATE BRUSH / SPRAY PAINTING TO APPLY PROTECTIVE COATINGS AND PAINTS TO THE FABRICATED STRUCTURAL STEEL MATERIAL OR PIPES / SPOOLS WITH THE...

  • Engineer I

    Found in: beBee S KW - 3 weeks ago

    Airport, Al Farwaniyah, 86, Kuwait Ambe International Full time

    Engineer-I & II (Maintenance) B.S/ B.E/ B.Tech Engg. Maintenance in Fire Fighting system equipment. Knowledge of Special tools, Fire vehicle maintenance. PM, Break down maintenance record, history etc. Knowledge in Computer, MS Office, MS Project, Maint. Management System etc. Last 4 years in similar Perform functions related to maintenance...

  • Field Engineer Logging And Perforating

    Found in: beBee S KW - 4 weeks ago

    Al Ahmadi, Kuwait Halliburton Full time

    We are looking for the right people -- people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the...

  • Field Engineer Logging And Perforating

    Found in: beBee S KW - 4 weeks ago

    Al Ahmadi, Kuwait Halliburton Full time

    We are looking for the right people -- people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the...

  • Drilling Engineer

    Found in: beBee jobs KW - 6 days ago

    Kuwait City, Al Asimah Governate Sofomation Full time

    Job Descriptionprepare well data sheets including well planning well designing. design and select drilling equipment draw up drilling programmes, taking account of desired production flow rates obtain relevant data, carrying out engineering analysis on site, recommending necessary actions and writing up reports monitor the daily progress of well operations...

  • Well Engineer, Assoc II

    Found in: beBee S KW - 4 weeks ago

    Ahmadi, Al Ahmadi Governorate, Kuwait Halliburton Full time

    We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the...

  • Field Specialist III

    2 days ago

    Al Jahra, Kuwait Oil and Gas Job Search Ltd Full time

    5-10 years related field experience related to drilling operations3 years College degree on Engineering or relevant to Drilling IndustryGeneral product knowledgeMechanical ability necessary to perform repairsValid Driver licenseBasic Microsoft Outlook, Word and Excel computer skillsSelf-motivator, self-starterGood oral and written communication skillsMust be...

  • Lab Technician

    2 weeks ago

    Al Jahra, Kuwait American International University, Kuwait Full time

    Determine the fixtures, attachments, and tools necessary to complete jobs according to specifications, and mount them on a machine prior to beginning cuttingDiscuss workpiece specifications with instructors and generate G-codeModify machine speed, tooling and cutting style to ensure precision and accuracy of manufactured partsSupervise machine temperatures,...

  • Painting Engineer

    Found in: beBee S KW - 4 weeks ago

    Rai, Al Farwaniyah, 85, Kuwait Universal Overseas Consultants Full time

    BE (Mechanical) - 4 years full time graduate, with NACE Certifications for Painting,10+ Years Experienced in Industrial Paintings and Coatings After shortlisting the candidates, the respective department want to conduct the Online Interview with immediate effect in the month of November / December ' 2023 itself Full time

  • Lead Design Engineer Piping

    Found in: beBee S KW - 4 weeks ago

    Airport, Al Farwaniyah, 86, Kuwait Wood Plc Full time

    Overview / Responsibilities Wood is recruiting a Lead Design Engineer -Piping to monitor the assigned scope to ensure Wood and Contractors perform all work to agreed standards for safety, health environment and demonstrate a commitment to attaining high levels of HSE (Health, Safety & Environment) performance. Responsibilities Participate in and...

  • Application Engineer Artificial Lift

    Found in: beBee S KW - 4 weeks ago

    North Ahmadi, Al Ahmadi Governorate, Kuwait Baker Hughes Full time

    Application Engineer - Artificial Lift Do you like working in collaborative teams and solving technical problems? Are you an Application Engineer looking for a new challenge? Be part of a team that keeps moving At Baker Hughes our purpose is clear. We take energy forward - making it safer, cleaner and more efficient for people and the planet. Artificial...

  • Application Engineer Artificial Lift

    Found in: beBee S KW - 4 weeks ago

    North Ahmadi, Al Ahmadi Governorate, Kuwait Baker Hughes Full time

    Applications Engineer Are you an Application Engineer looking for a new project? Do you enjoy being part of a successful team? Join our team! Our oilfield technology and services help you operate efficiently and predictably, ensuring that projects are executed right the first time and assets consistently perform at peak productivity. Our portfolio is...